The Slip On Flanges is a kind of flange which is loose on the flange of vessel or pipeline. Flange is a part connecting shaft and shaft, which is used to connect pipe ends; It also uses the flange on the equipment inlet and outlet to connect the two equipment.

TheSlip On Flanges is a loose flange. The flange can be made by flanging, directly turning out or welding ring. The advantages are that when the flange deforms, there is no additional torque on the container or pipeline, and the manufacturing is convenient. It can be made of different materials from the container or pipeline, which is convenient to save precious metals. The disadvantage is that the flange is thick. It is suitable for vessel or pipeline lining with brittle material and low pressure.

Application of TheSlip On Flanges

They are mainly used for fluids with low pressure or low risk of leakage. It is very common to find these flanges today in cooling water lines, fire water lines, low-pressure compressed air pipes, on substances such as steam, oil, gas, condensate, etc. and process lines, but always keep in mind that the materials are distributed in a low-pressure state, and the requirements for working conditions are not high.

What is the use of flange?

Flange is used for positioning. For example, there is an installation method of oil cylinder, which is called flange installation. For example, four symmetrical holes are drilled around a cuboid, and there is a big hole in the middle, which is the same as the outer diameter of the oil cylinder. Put the cuboid on the oil cylinder, and they can be welded and fixed together in other ways, The connection between oil cylinder and other things is connected by four holes around the cuboid, which can be called flange.

http://www.gcflange.com/