PP coupling pipe fitting mould
Product specification
Name |
Coupling |
Material |
PP |
Standard |
EN/DIN/GB/BS |
Use |
Used to connect pipes or as accessory to a pipe |
Mould specification
Cavity No. |
Single/Multi-cavity |
Core&cavity |
P20,718,2738 ,etc. |
Mould base |
LKM, HASCO, DME,LX STANDARD |
Core pulling system |
Motor /oil cylinder/ stripping plate, angel pin,etc |
Mould action |
Fully automatic |
Gate system |
Tunnel gate/Point gate/Direct gate/Sub-gate/Rectangular gate,etc. |
Heat treatment |
empering/Quenching/Nitriding |
Mould Accessories |
DME,HASCO,LX Standard ,etc |
Surface finish |
Texture,sand paper,diamond,etc |
Mould life |
500,000 ~1million shots |
Runner |
Cold/Hot |
Hot runner |
YUDO,HASCO,DME,etc |
Delivery time |
30~60 working days |
For Mold Making:
When making mold project,per customer's requirement for mold steel material,we choose the suitable mold steel grade for our customers.We have high quality German and Japan imports mold steel material to proceed our mold project making.Then,the gating way will be discussed,the mold surface will be discussed,the mold cooling channel design will be checked,the operation style will be discussed,the molding machine size will be determined and the mold mechanism in actual production movement will all be checked as well.
Only after our mold engineers discussing with our customers for the mold engineering in detail,we will proceed with our mold making job.
Production process
Accessories details
Mould cooling water nipple
Our honor
Payment:T/T
50% of total price should be paid as down payment with order,another 30% of total price should be paid with initial try-out ,last 20% of total price should be paid before shipment.
Packaging & Delivery
Packaging Details:Fumigation wooden crate
Port:Ningbo
FAQ:
1.What is involved in injection mold preventive maintenance?
A:All molds have moving pins in them to eject the part out.Maintenance will include periodic greasing of these pins,as well as all other moving components,and cleaning of the cavity and core surfaces.
2.What is the difference between a multi-cavity mold and a family mold?
A:A multi-cavity mold has multiple cavities of the same part;a family mold produces a set.For instance,for an electronic enclosure,you may need a front,back,battery door,and a button.Those could all be molded at once in a family mold.
3.How much does a mold cost?
A:Again,varying greatly on complexity,quality,and size,a mold can cost anywhere from $2,000-$3,000 for a simple,single cavity mold,up to $60,000-$100,000 or more for a high production,multi- cavity mold made with hardened tool steel.Typically,the molds we build are in the $3000 -$5000 range.
4.What material should I use?
A:There are almost 100,000 materials in the marketplace today,so it can be very overwhelming,but if we can learn about your application,for instance,will the part be outside?What kind of abuse will it need to withstand? We can often recommend grades that are readily available,and less expensive.
5.How long does it take to build an injection mold?
A:Depending on complexity and our tool room load,it can range from 2 to 12 weeks.
http://www.loncinmoulds.com/